Temperature Sensors
Reporting Temperature in Degrees Celsius
The integration de sensores de temperatura por MQTT uses the following structure:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"temperatureCelsius": 25,
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateTemperatureSensorStatus",
"mqttRID": "RXmp123"
}Parameters
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier or combination of device address and endpoint address in format [deviceAddress]:endpointAddress (e.g.: [device-1234]:1). These values can be found on the endpoint management page. | text |
| temperatureCelsius | Measured temperature, numeric value greater than or equal to -273.15, indicating the measured temperature in degrees Celsius (C). | numeric |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Método correspondiente del servicio, en este caso UpdateTemperatureSensorStatus | string |
| mqttRID | Identificador opcional para la petición, en caso de que se desee obtener una respuesta de confirmación. | string |
Reporte de temperatura en formato "raw"
La temperatura puede ser reportada como un valor crudo (raw), utilizando el conversor de expresiones. Esta opción es conveniente cuando el dispositivo no es capaz de realizar conversiones, y emite valores que necesitan ser transformados antes de inyectarse en la plataforma.
A continuación, se muestra un ejemplo de una petición en formato raw:
{
"accessToken": "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"endpointID": 1,
"rawData": "45",
"timestamp": "2021-02-23T14:55:03",
"mqttMethod": "UpdateTemperatureSensorStatusRaw",
"mqttRID": "RXmp123"
}Parameters
| Name | Description | Data Type |
|---|---|---|
| accessToken | Access token with permissions to update endpoint information. See this page for more information. | text |
| endpointID | Unique endpoint identifier, which can be found on the endpoint management page. | numeric |
| rawData | Valor reportado por el sensor, como texto. Debe indicarse una expresión en el conversor de expresiones. La expresión debe devolver un valor numérico mayor o igual a -273.15, indicando la temperatura medida, en grados Celsius (ºC). | text |
| timestamp | Optional value indicating the UTC date and time corresponding to the measurement. The date format must match one of those specified in the date formats section. If the field is omitted, the platform will assume the measurement corresponds to the current date and time. | text |
| mqttMethod | Método correspondiente del servicio, en éste caso UpdateTemperatureSensorStatusRaw | string |
| mqttRID | Identificador opcional para la petición, en caso de que se desee obtener una respuesta de confirmación. | string |